Disney

Registered
  • Content count

    1,931
  • Joined

  • Last visited

Everything posted by Disney

  1. Comp. Coding

    Absolutely. That's where the money is at now and for the next generation.
  2. ITSnolongerASIX 1966 Mustang

    Soooo... The plan today is to do an MS3X using the 36-1 wheel, Explorer cam sensor, and LS coils. I wanted to keep it sequential and leave room for future upgrades. MS3X will do that. I have thought a lot about going MS3Pro, but I don't think there's any value added over the MS3X in this car with its intended use.
  3. Project *Name My Project*

    Project: Macy Grey
  4. Random thought thread

    Yes. Called a welder.
  5. Project #whitetrash

    Similar to the combo I ran on one of the Lincolns back in the day except the heads were ported pretty heavily. I think I went 12.7's on motor with that and the 6 speed (shitty tall 1st gear). That one was the lightest of them all so far, ~3850 race weight.
  6. Project #whitetrash

    Similar to the combo I ran on one of the Lincolns back in the day except the heads were ported pretty heavily. I think I went 12.7's on motor with that and the 6 speed (shitty tall 1st gear). Hopefully you've got a 4.10 gear. I'd wager some 12.20 on motor with this combo given good tires, trans, and driver (me).
  7. Catalina Wine Mixer Track Rental

    No apology needed. Dallas is a dickbag and he knows it. I did however think he would honor your agreement of 3K. Him doubling it just before the event is a super dick move. Kudos on not driving up there and punching him the fleshy patch where his balls once were.
  8. Project #whitetrash

    1100# less.....
  9. 2010 Camaro SS

    DAAAAAAAAANG!!!!! That's a hell of a haul on parts! Love shipments like that!
  10. Catalina Wine Mixer Track Rental

    Ahhhh.. That's what I originally thought. DR's = slicks to me.
  11. Project #whitetrash

    I've hit stock bottom ends with 300
  12. Catalina Wine Mixer Track Rental

    Wait.. WUT? I was bringing DR's. I may back out if it's non-DR / Slicks only. Aint got no slicks.
  13. 2010 Camaro SS

    Yeah, that's a big ass cam.
  14. Project #whitetrash

    Should get 12.50s on motor alone, deep in the 11's depending on how brave you spray.
  15. Fox Mustang: Next Purchase

    Seal = flare to me. Yeah, That sucks. I've battled some of that in the past and wouldn't wish it on anyone.
  16. Project #whitetrash

    Dang! Stroker? Gotta be!
  17. Catalina Wine Mixer Track Rental

    @Mike, I won't be upset if you cancel it at this point. I feel your frustration and honestly I don't think anyone needs that in their life. Let's just plan to do it in the spring time.
  18. 2010 Camaro SS

    Those are NIIIIICE
  19. Express Success

    Yes, First one I ever touched I put cam bearings in and the cam wouldn't hardly turn. Ended up scrapping that block.
  20. Express Success

    Pretty much every LS cam bearing it like that. They don't line bore the block cam bore. They intall the bearings and then line bore/hone those. Brand new crate motors from GM have copper showing. Roll on, big momma.
  21. 1.8 toyota "misfire"

    Might measure the resistance on them. It sounds like spark blow out which is why I asked about the plugs.
  22. Fox Mustang: Next Purchase

    Not like Red Horse fittings are the cream of the crop. Are the current fittings leaking past the seal?
  23. 1.8 toyota "misfire"

    Plugs new?
  24. 2010 Camaro SS

    I'd probably go ahead and delete the VCT. One less thing.