Mighty Mouse

Registered
  • Content count

    37
  • Joined

  • Last visited

About Mighty Mouse

  • Rank
    Rookie

Recent Profile Visitors

1,787 profile views
  1. 2014 Kawasaki Ninja 650

    2014 Ninja 650. Purchased brand new in July 2015 always stored inside. Bike has ~ 1200 miles on it, ABS brakes, and needs nothing but a rider, which is something I don't have time for. $5800 takes it home. 615-838-4119
  2. Misc. Stuff For Sale

    CSI Carbon Fiber trans shield for a powerglide-$125 Moroso Oil Pan and oil pump pickup for pan small block chevy. Deep sump made to fit 66-67 chevy 2 Nova-$100 Brodix cast aluminum valve covers for SBC-$100 Weiand electric water pump SBC-$50 Autometer 5351 shift light programmable with playback-$150 Can text pictures if interested 615-838-4119
  3. Project Mighty Mouse 74 Nova

    This all started at the end of last year. I knew in order to just stay mid pack in X275 I needed more power. The platform I was using last year could have been made better but it really would have been like starting over. Once I sat down with Jon Bennett and discussed it we could do the LS deal for not much more and have a good platform to build on in the future. I am hoping to have it in the car and tested ready for all the fall races.
  4. Project Mighty Mouse 74 Nova

    Bennett finally got the new motor finished up last week. Hope to have it running by the end of the summer. It is new territory for me as I have zero LS based experience. I am trying to get things swapped over and find the correct flexplate and all the metric bolts for bellhousing etc. Once it is in the car the hot side plumbing will have to be redone. I am excited about it. This thing made about 75-80 HP more naturally aspirated than the old motor and the power band is about 1000 rpm higher as well! Under boost it will be a beast! Stay tuned for updates.
  5. Project Mighty Mouse 74 Nova

    Not a lot has changed..........yet. I am expecting to get to the dyno in the next week or so with the new LS based power plant. New shocks all the way around and finding ways to get more weight out of the car were the focus this off season. I also had a spread in the January 2016 issue of RPM magazine.https://issuu.com/rpmmag/docs/rpm16-01_webready_lr/1
  6. For Sale: Autometer Shift Light-Playback

    New in box Autometer 5351 LED shift light. Fully programmable 4 shift points and will record and playback up to 80 seconds. $250 OBO
  7. NHRA could get cool again

    I bet by the end of the year they will be real close to where they were. I agree with Mike the 10500 rpm limit will hurt them more than anything else. The good thing is most of those teams have a lot of data from when they were turning them 10500 so they will be on it pretty quick.
  8. Shocks, Wheels and Converter For Sale

    Wheels and shocks are sold! Who needs a converter?
  9. Post your best slips and video!

    All boost in as quick as I can get it there.....and like Mike said the unicorn piss don't hurt! In that session I went 1.09, Jared Johnston went 1.02! I still have work to do.
  10. Shocks, Wheels and Converter For Sale

    Double adjustable coil over Afco rear shocks with 12" 150lb springs on them. $350 Bradco nitrous converter $500. This converter was behind my 421" small block nitrous motor. Weld Aluma Star front wheels 5 on 4 3/4 bolt spacing with Mickey Thompson front runners on them $450
  11. 88 MM Turbo For Sale

    If you can spin it, it will do the trick. Made over 1200 to the wheels on my junk.
  12. 400 CI Chevy Bennett Racing Turbo Motor

    Yes I do Mike but I wanted to price it to move it.
  13. 400 CI Chevy Bennett Racing Turbo Motor

    I am thinking of going a little bit different direction on the motor next year but need to move this one first. I am hitting the hi points with this listing. If you are serious about buying we can get more details photos etc. The motor is out of the car and the heads are currently at Bennetts being freshened. 400 ci Small Block Chevy Dart steel block GRP Aluminum Rods Lunati Crank Ross Pistons Brodix BD 2000 Symetrical Port heads. Titanium intake valves, Inconel exhaust valves. PSI springs (new) T&D Shaft Rockers Brodix Intake Drilledwithinjector bungs in it Jesel Roller Lifters Steffs Oil Pan ATI Balancer and Flexplate Comp Belt Drive MSD Crank Trigger and Distributor Motor has one season since freshened by Bennett(~60 runs) New cometic gaskets will be installed when the heads are freshened. The sheet metal elbow in the picture does not come with it, neither does the motor plate. No junk. This motor with the 88mm turbo I have listed will go 4.6 @ 154mph in a 3300 pound car. Motor $12,500 Or if you want turbo andmotor I will do that for $14,500.
  14. 88 MM Turbo For Sale

    Precision X275 88mm Turbo. • Exclusive CEA (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging • 88mm inducer compressor wheel • Large frame compressor cover with ported shroud inlet • G trim turbine wheel • Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA) Billet wheel, low runs, two exhaust housings, 1.50 and 1.0 AR. One is nitroplate coated. $2200 OBO Plus the ride. Would be willing to meet someone with in a hour radius of me. stinsonn@bellsouth.net facebook or reply here