fast92stang

Registered
  • Content count

    32
  • Joined

  • Last visited

Everything posted by fast92stang

  1. Judge this run: Red Light or Good Run?

    frame by frame, he red lit........close, but red.
  2. Prayers for a fellow hot rodder.

    we never raced there.....lol Nobody street races.
  3. Post your best slips and video!

    all motor. 6.0, cam, carb intake. Otherwise all stock. But I have the good square port heads. Milled .020.
  4. Post your best slips and video!

    pass on right is legit best. But you can tell the pass on the left was better.
  5. Post your best slips and video!

    My wife hardly ever video's my runs. I was gonna tell her, but didnt,
  6. Post your best slips and video!

    update 6.307 , had a 28 pass but had to pedal to avoid break out. I will try and post a slip tom.
  7. Prayers for a fellow hot rodder.

    Holy crap. first I heard of this......That is awful. prayers for the family.
  8. Post your best slips and video!

    not my best overall, but close as it gets till next outing hopefully.
  9. SCORE!!!

    got too many variables there Raceall. Got to be the right 6.0, and tehre is not any cheap 6.2s. LOL. I got my 6.0 for 400. The heads were the good L92s. You can find the generic 6.0s with 317 heads for around 5-600 tho. Ditch the 317 heads and put some 243s or l92s on it and a cam, and be done.
  10. SCORE!!!

    600 be pretty easy with a 6.0 or 6.2. Mine shows on the calculators about 580 or so, with just a cam and a carb. No expensive parts inside.
  11. 2011-UP V6 Mustangs Drag Racing

    you know that was a 400, just tell the truth. lol Nice car tho.
  12. Like the Garage and Timeslips?

    I posted mine, dont have the 34 timeslip on computer, or the 35 60ft. But i will be lowering all those times anyway. lol I wont be at the top anyhow. qwk has went 4.96, no danger of me running near that.lol
  13. I have Hoosiers, and the new pro's to mount, but I have been 1.35 60ft on the Hoosiers. Hoosiers are lighter, I swapped from the old MTs to Hoosier and picked up .1 and 2 mph. BUT, they dont drive as good as MTs on street.
  14. How much does your car weigh?

    I dont have any of the unit I pulled out. It was pulled a couple years ago. JohnC, I am still trimming a little weight from the car, cut a little out last night. Stuff that is just there, in the way and not used. I plan on losing about 60 or so pounds in it for this year, and put the 4.30 gear in over the 4.10. It isnt much change, but the motor loves rpm's and It will still run the 1/4 mile with the 4.30s. i think it should trap about 72-7300 with them and i have had it to 7500 or so with no issues. The blocks are roughly 100 lbs difference. I had a 6.2 later last year, aluminum block, but parts dept screwed me out of it. Thats the next plan, to get a 6.2 and try and get it in the 5s. Still wanting to get my super vic intake, they are rumored to help alot. Hopefully by years end, it will weigh in about 2880-2900 and really looking for a 6.11-6.19. Its been 6.34 heavier and the carb is still pig rich just off theline, I think if I clean it up a tad, it will leave better and hopefully run a little better. btw i also intend to get myself more "ideal" weight wise too. Me and the wife are both going on a diet in about 10 days. I plan to lose about 20 lbs at least myself.
  15. So how much can yo save doing DIY Turbo?

    well, cam and valve springs....but yes, stock 6.0 with cam, but my heads are the LS3.....they came stock on the LY6.
  16. How much does your car weigh?

    92 Mustang coupe. turbo 350, LS iron block, no heat or ac, 8 gallon fuel cell. All stock seats(right now) stock dash with radio console and all. Still has carpet and door panels. 8 point roll bar, sub frame connectors, rear anti roll, 4 inch cowl hood. Last year at NMRA I weighed in where the class cars weighed, with me in it 2965 lbs.
  17. So how much can yo save doing DIY Turbo?

    swap it. easy. done. LOL. I know i know.....i was firm against it too, but now running low 6s with cam only motor, so my only regret is not doing it sooner.
  18. Work Thread....What do you do?

    Auto tech at cadillac, chevy dealer. Guess I will grow old at it. Or at least older anyway. Its good money here tho, lots better than west Ky. Here in Tn, they seem to pay lots better. I drive 70 miles one way, but make 8 dollars more an hour. About 20-25k more a year.
  19. New member revisted

    welcome Brad
  20. Intake is a victor jr right now, wanting to swap to a super vic, but not available yet.
  21. Some of you guys may not remember me, I was fast89stang, but have a 92 now with a lsx swap. I know Disney should remember me, i let him borrow my trailer one time to go to Georgia I think, and sold him a few parts. I seen all this talk on tnrace and wandered over. I got a white 92 coupe now, its my street/drag car. Runs low 6s......blah blah blah. Good to see some of you again. been a few years. Oh and Disney, YOURE NOT FUNNY!!!!! lol
  22. Its a holley hp 150. I like these pumps a lot. Quiet and work great
  23. Thanks btw. It turned out ok.
  24. Paducah, clarksville, jackson, bg, lots really. I even went to holly springs once.